You can watch live on your phone, tablet and computer wherever you are.

You can watch live remotely whenever you want, or look at old recordings if you wish.

If you wish, it can record moving areas thanks to 24/7 recording or motion detection.

Watch images live and in HD, day and night. Don't overlook any detail!

You can optionally set the recording duration. (15days / 1 month / 2 months…)

With pricing in TL, you are not affected by the dollar exchange rate.

The camera system alone does not help us to be aware of the dangerous situations we will encounter in life. With Goldtech Security Systems, you will be called within 10 seconds on average in case of alarm.

You can reach us via the Goldtech Security Systems website or by calling our contact numbers. You can have a camera system with the discovery that our security consultants will carry out in the place where the camera system is desired to be installed.

You can reach us via the Goldtech Security Systems website or by calling our contact numbers. You can have a camera system with the discovery that our security consultants will carry out in the place where the camera system is desired to be installed.

Recording times can be calculated on a virtual recording sheet if users wish. The recording period is determined by making designs suitable for the desired system. In addition, in security systems, the number of cameras, hard disk capacity, etc. Factors lead to differences in registration times.

Of course. If there is an active internet connection in the place where the system is installed, you can access instant or recorded images from any device you want, wherever you are.

You can apply by contacting us on the relevant phone numbers.

During the free discovery, our security consultants will give you detailed information about the use of the system.

We have a battery circuit connected to our system, taking into account possible situations such as a power outage. In such outages, the battery comes into play and ensures that the system remains active. When the power outage ends, the system automatically continues to operate via the power line. The connected battery recharges itself and becomes ready for the next outage.

From the moment the alarm system is activated, it starts to work synchronously with our communication line and sends a signal to the Goldtech Security Systems Monitoring Center. The user or the relevant law enforcement authorities are informed in an average of 10 seconds.

Our alarm systems can be controlled remotely (up to 30m). Apart from this, it can be controlled remotely via mobile application.

There are two types of smoke detectors: optical and ionization. They are effective against smoke (White and black smoke). When making the selection, the fire risk in the area to be protected should be taken into consideration. In ionization smoke detectors, an electric current flows between two electrodes. When smoke comes in, this current decreases. In optical smoke detectors, smoke is detected by a light distribution.

Alarm sirens are electronic sirens that must be audible throughout the building in order to alarm or evacuate the occupants of the building.

Heat detectors can be of the type set to constant temperature or set to detect an increase in temperature. These are less sensitive than other detectors. It should be used in places where small fires are likely to break out. It may not detect small temperature changes. When choosing heat detectors, care should be taken to choose 20 degrees above the ambient temperature.

Check that the front indicator of the battery charging section is working. Check for any indicator and siren operating errors.

The user should regularly perform the following tests and maintenance. The system must be constantly tested and necessary services must be provided.

Fire is a major disaster that causes loss of life and property. Considering the speed of fire spread, it is important to provide first aid as soon as possible. The main function of Fire Detection and Alarm Systems is to find the source of the fire and extinguish it in a short time. Projects made without taking into account the time it takes to find the source of the fire or not choosing the type of detection elements correctly will cause the system to not fully fulfill its main function. In addition, failure to select the sensor type in accordance with the environmental conditions will cause false alarms and will result in the loss of reliability of the system.

Control panels are selected according to the size of the building to be protected, the amount of detection and warning elements, the required assistance control relays and the needs of the customer.

Detector selection is an important element. The detector must distinguish between fire and daily events. It should be able to distinguish the gases present in the environment due to cigarette smoke, steam and stored products from the smoke of a real fire. In addition, detectors must be placed correctly, taking into account their detection areas.

Fire alarm buttons are products that enable personnel to raise an alarm in the event of a fire by activating the alarm system. These buttons; It must be well mounted at a height of 1.4 meters from the ground and at points that can be easily reached without obstruction, without having to go more than 30 meters from any point to raise an alarm.